Mitaka Co., Ltd.

We produce, Straight wires, Long coiled sheaths, Stylets, Mandrels, Micro coil springs, Deformed wire coil springs, Discharge needles, contact probes, Wire probes, Suspension wires, Jigs for probing sockets

English | 

We at Mitaka are proud to offer components for medical equipment... ...and it is our resolution to always keep challenging. In order to offer security, safety and satisfaction to our customers, Mitaka will continue turning our dreams into our products.



1765-1 Menuma, Kumagaya-shi,
Saitama, Japan 〒360-0201
TEL +81-48-588-5552
FAX +81-48-589-0040



Medical straight wires
Long coiled sheaths
Precious metal coils
Stylets, Mandrels
Embolus coils
Contact probes
Wire probes
Jigs for probing sockets
Suspension wires
Discharge needles
Deformed wire coil springs


HOME(Japanese)»  HOME (English)
  Semi-conductor/Substrate Inspection Components   Electronic Equipment Components
Our Business   Company


What's NEW!!


The Au coil can be processed.

This (999) gold wire is soft and easily cuts off.

Contact Us! Were happy to answer any questions

or concerns you may have on coils.




Medtec Japan 2018 is holding Asia’s largest exhibition and seminar on designing and manufacturing

medical equipment.

We will be exhibiting this year again! We hope you can come visit our machining technique as well as

our products on display.


Name: Medtec Japan 2018

Date/Time: 18-20 April – 10:00 am – 5:00 pm

Site: Tokyo Big Sight- East Hall 4,5 and 6

Organization: UBM Japan Co.Ltd.

Support Association: Japan Association for the Advancement of Medical equipment/ Japan Federation of Medical Devices Association/

日本の技術をいのちのために委員会(Nihon no gijutu wo Inoti no tameni iinkai)

Sponsors: Congress of Japan Association for Clinical Engineers/ Commons for Medicine and Engineering Japan


Mitaka Booth Number: 2206


Free entrance is available in advance. Please refer to website below.



COMPAMED Exhibition will take place at Dusseldorf Germany displaying medical device technology

in addition to parts/materials.

We will be exhibiting this year too. We hope you can drop by our booth and get a good look at our

machining technique and products.


Exhibition name:  COMPAMED

Date/Time:  From 13-16 November 2017        Opening Hours: Mon-Thu/ 10:00-18:00

Location:  Messeplatz   40474 Dusseldorf /Germany     Trade fair 8a, 8b Building

Sponsored by:  Messe Dusseldorf GmbH

Exhibiting:  MEDICA International Medical Equipment

Mitaka Booth Number: Hall 8b H21


Please refer to official home page:


We have installed a new large ultrasonic cleaner.

The tank is available for products up to 700mm.


 Below are the measurements for the centerless

processing of outside coil.


Material: SUS304    

Shape: Tightly wound    

OD of coil:φ0.32mm

Grinding OD :φ0.28mm

Grinding length :about 100mm

Length of coil 300mm


I look forward to hearing from you for details on this matter. 


We are conducting a sales campaign to promote our products, the Stylet and Mandrel.


Round processing is possible for the long wire at both ends in addition to forming the handle

part in various shapes.

This is an integrated production from receiving material to processing and packaging. It is

also disposable and made at a low price.


Please feel free to contact us any time. We look forward to hearing from you.


There will be an exhibition coming up in Kyoto “CVIT 2017” for the 26th Annual Meeting of the Japanese Association

of Cardiovascular Intervention and Therapeutics. Also the Manufacturing Technology Show will take place too.


It is an honour to say that we also will be there displaying our products.

Please be sure to drop by our booth. We look forward to seeing you.

open hours: 9:00 am – 5:00pm

Location: Kyoto International Conference Center (Takaragaike, Sakyo-ku, kyoto)


MEDTEC Japan 2017 exhibition finished with great success !!

Visitors that came to the exhibition hall numbered approximately 32,561 people.

We had a bigger booth this time and 250 visitors paid us a visit.

This was our first time to have so many visitors and it ended with great success.

Finally, thank you all for visiting our booth and hope you enjoyed the time with us.

It was a great pleasure metting you all.






The great exhibition 「MD&M-West」which was held on February 7-9, 2017 finished
with great success.
The number of visitors reached to approximately 16000 people!!
We thank all the visitors for taking the time to visit us and showing interest in our products.
We hope for additional future business development and achievement of further success to all.



Hello everyone !
As u can see we had solar panels installed on the roof of our company.
This way we can give consideration to the environment by emitting
greenhouse gases that cause global warming.
It will also be used as an emergency power supply when sudden blackouts occur.
We are hoping for great effective use in the future !


Mitaka will take part in the MD&M Minneapolis 2017 exhibition, Feb/7th - 9th.
Please drop in at our booth No.2041 on the occasion of arrival.
We will be looking forword to your presence.


Mitaka will take part in the COMPAMED 2016 exhibition in Nov/14th to 17th.
Please drop in at our booth (Hall 8bH21) on the occasion of arrival.




【COIL Size】

We could make a 9.1mm outside diameter coil by stainless tube.
It was very unique coil.
Please don't hesitate to reply if this is of interest to you. 


Sep.26th.2016. : The MD&M Minneapolis exhibition held in 2016 has ended with great success!!!

They were approximately 5000 visitors these 2 days. Since it is surrounded by Medical Centers, it was crowded with medical technicians and visitors. Good converstations were held there too. We will be very happy to receive your enquiry and hope you enjoyed our products.
Although it was our first time to participation in the MINNEAPOLIS exibition, it ended with great success.Thank you so much for visiting our booth during your busy schedule. We look forward to seeing you again.


Mitaka will take part in the MD&M Minneapolis 2016 exhibition.  2016.08.24.


            An office in affiliated company M.T.K.TECHNOLGY COMPANY LIMITED moved.

【New address】
Room 601, 6/F, Tung Hip Commercial Building, 248 Des Voeux Central, Sheung Wan, Hong Kong
+852 3582 1675
+852 3582 1668


We will take part in the Medtec Japan 2016 exhibition.
April 20th-22th 2016. TOKYO BIG SIGHT.   10am-5pm.
Our booth number is 4009.

MD & M 2016 exhibition being held.  2016.02.10
Mitaka will take part in the MD&M 2016 exhibition.  2016.02.05
English page open 2016.1.25